Welcome to Arcellor!

Call us 8:00am - 8:00pm

079-2273 3345 / 6353949804

Monday to Friday

8:00am - 8:00pm

E-mail us

info@arcellorcontrols.com

Service Details

Services

Weld Neck Flange Manufacturers India

Long Weld Neck Flange Suppliers, ASME B16.5 Weld Neck Flange Dimensions

Weld Neck Flange Class 150, Expander Weld Neck Flange, Welding Neck Flange DIN EN 1092 1, Threaded Flange PN16,Weld Neck Flange Dimensions Class 600

Weld Neck Flange Flat Face, Weld Neck Flange RTJ Face, Weld Neck Flange Class 300, Weld Neck Flange Class 900, Weld Neck Flange Schedule 80

Weld Neck Flange ASME B16.5

Long Weld Neck Flange ANSI B16.5

Table Of Content

Weldneck flanges

Arcellor Controls has reputed name in metal industry as a Weld Neck Flange Manufacturers India with hogh quality material and standards. ANSI B16.5 Weld neck flanges have drilled wall thickness which is of equally same dimension existing for matching pipe. Bore will be larger if the pipe is lighter and opposite will be true if pipe is heavier and the bore will be small. There are two types of weld neck flanges, which are standard and long. Standard weld neck flanges are used in butt weld fittings. We are well known as Long weld neck flange manufacturers, used with vessel nozzles and equipment. ANSI B16.5 Reducing Weld Neck flanges are created to match the pipe’s inside diameter or fitting. The reason why it is bored to match is because it reduces the corrosion and turbulence that takes place inside of the pipe. Our offered Long weld neck flanges are called by this name due to their longer neck as compared to standard flanges. These Weld Neck Raised flanges are used in industrial applications as nozzles for columns or barrels. Arcellor Controls as well is significantly reduced in pipeline as bores of flange & pipe match. Due to these reasons weldneck flanges are chosen for critical applications where high pressure and hot-cold temperatures are prevalent. The different kinds of weldneck flanges available are:
  1. Weld neck flanges – raised face
  2. Weld neck flanges – flat face
Weld Neck Flange Manufacturers India
Supplier Of BS10 Table E Weld Neck flange, Weld Neck Flange Schedule 10, Weld Neck Flange Flat Face Dimensions, Weld Neck Flange Raised Face Dimensions,Weld Neck Flange Suppliers UK
Weld Neck Flange Suppliers in UAE, Weld Neck Flange Malaysia, Weld Neck Ring Joint Flange, Weld Neck Flange Size chart, Weld Neck Flange Weight, Weld Neck Flange Schedule Chart
ANSI/ASME B16.5 Weld Neck Flange Specification
Dimensions  ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
Size 1/2″ (15 NB) to 48″ (1200NB)
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
DIN DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673
BS BS4504 , BS4504, BS1560, BS10
Coating/Surface Treatment Antirust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Value Added Services CNC Machining, Customised Flanges
Weld Neck Flange Material Specification
Stainless Steel Weld Neck Flanges :  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L Duplex & Super Duplex Steel Long Weld Neck Flanges :  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 Carbon Steel Weld Neck Flanges :  ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706 Low Temperature Carbon Steel Long Weld Neck Flanges : ASTM A350, LF2, LF3 Alloy Steel Weld Neck Flanges :  ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91 Copper Alloy Steel Weld Neck Flanges : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200 Nickel Alloy Long Weld Neck Flanges :  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)
ANSI/ASME B16.5 WELD NECK FLANGE DIMENSIONS, WELD NECK FLANGE SIZE CHART, WELD NECK FLANGE DIMENSIONS IN MM
ANSI B16.5 Long Weld Neck Flange Dimensions, PN16 Weld Neck Flange Dimensions, 4 Weld Neck flange Dimensions
Weld Neck Flange Dimensions
ANSI B16.5 WNRF Flange Dimensions,Weld Neck Flange Raised Face Dimensions
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 90 9.6 30 21.3 46 Refer Note 34.9 2 60.3 1.6
3/4 20 100 11.2 38 26.7 51 42.9 2 69.9 1.6
1 25 110 12.7 49 33.4 54 50.8 2 79.4 1.6
1 1/4 32 115 14.3 59 42.2 56 63.5 2 88.9 1.6
1 1/2 40 125 15.9 65 48.3 60 73 2 98.4 1.6
2 50 150 17.5 78 60.3 62 92.1 2 120.7 1.6
2 1/2 65 180 20.7 90 73 68 104.8 2 139.7 1.6
3 80 190 22.3 108 88.9 68 127 2 152.4 1.6
3 1/2 90 215 22.3 122 101.6 70 139.7 2 177.8 1.6
4 100 230 22.3 135 114.3 75 157.2 2 190.5 1.6
5 125 255 22.3 164 141.3 87 185.7 2 215.9 1.6
6 150 280 23.9 192 168.3 87 215.9 2 241.3 1.6
8 200 345 27 246 219.1 100 269.9 2 298.5 1.6
10 250 405 28.6 305 273 100 323.8 2 362 1.6
12 300 485 30.2 365 323.8 113 381 2 431.8 1.6
14 350 535 33.4 400 355.6 125 412.8 2 476.3 1.6
16 400 595 35 457 406.4 125 469.9 2 539.8 1.6
18 450 635 38.1 505 457.2 138 533.4 2 577.9 1.6
20 500 700 41.3 559 508 143 584.2 2 635 1.6
24 600 815 46.1 663 610 151 692.2 2 749.3 1.6
Note: Welding Neck bore is derived from the pipe schedule
CLASS 300 WELD NECK FLANGE DIMENSIONS
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 95 12.7 38 21.3 51 Refer Note 34.9 2 66.7 1.6
3/4 20 115 14.3 48 26.7 56 42.9 2 82.6 1.6
1 25 125 15.9 54 33.4 60 50.8 2 88.9 1.6
1 1/4 32 135 17.5 64 42.2 64 63.5 2 98.4 1.6
1 1/2 40 155 19.1 70 48.3 67 73 2 114.3 1.6
2 50 165 20.7 84 60.3 68 92.1 2 127 1.6
2 1/2 65 190 23.9 100 73 75 104.8 2 149.2 1.6
3 80 210 27 117 88.9 78 127 2 168.3 1.6
3 1/2 90 230 28.6 133 101.6 79 139.7 2 184.2 1.6
4 100 255 30.2 146 114.3 84 157.2 2 200 1.6
5 125 280 33.4 178 141.3 97 185.7 2 235 1.6
6 150 320 35 206 168.3 97 215.9 2 269.9 1.6
8 200 380 39.7 260 219.1 110 269.9 2 330.2 1.6
10 250 445 46.1 321 273 116 323.8 2 387.4 1.6
12 300 520 49.3 375 323.8 129 381 2 450.8 1.6
14 350 585 52.4 425 355.6 141 412.8 2 514.4 1.6
16 400 650 55.6 483 406.4 144 469.9 2 571.5 1.6
18 450 710 58.8 533 457 157 533.4 2 628.6 1.6
20 500 775 62 587 508 160 584.2 2 685.8 1.6
24 600 915 68.3 702 610 167 692.2 2 812.8 1.6
Note: Welding Neck bore is derived from the pipe schedule
WELD NECK FLANGE CLASS 400 DIMENSIONS
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 95 14.3 38 21.3 52 Refer Note 34.9 7 66.7 1.6
3/4 20 115 15.9 48 26.7 57 42.9 7 82.6 1.6
1 25 125 17.5 54 33.4 62 50.8 7 88.9 1.6
1 1/4 32 135 20.7 64 42.2 67 63.5 7 98.4 1.6
1 1/2 40 155 22.3 70 48.3 70 73 7 114.3 1.6
2 50 165 25.4 84 60.3 73 92.1 7 127 1.6
2 1/2 65 190 28.6 100 73 79 104.8 7 149.2 1.6
3 80 210 31.8 117 88.9 83 127 7 168.3 1.6
3 1/2 90 230 35 133 101.6 86 139.7 7 184.2 1.6
4 100 255 35 146 114.3 89 157.2 7 200 1.6
5 125 280 38.1 178 141.3 102 185.7 7 235 1.6
6 150 320 41.3 206 168.3 103 215.9 7 269.9 1.6
8 200 380 47.7 260 219.1 117 269.9 7 330 1.6
10 250 445 54 321 273 124 323.8 7 387.4 1.6
12 300 520 57.2 375 323.8 137 381 7 450.8 1.6
14 350 585 60.4 425 355.6 149 412.8 7 514.4 1.6
16 400 650 63.5 483 406.4 152 469.9 7 571.5 1.6
18 450 710 66.7 533 457 165 533.4 7 628.6 1.6
20 500 775 69.9 587 508 168 584.2 7 685.8 1.6
24 600 915 76.2 702 610 175 692.2 7 812.8 1.6
Note: Welding Neck bore is derived from the pipe schedule
WELD NECK FLANGE DIMENSIONS CLASS 600
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 95 14.3 38 21.3 52 Refer Note 34.9 7 66.7 1.6
3/4 20 115 15.9 48 26.7 57 42.9 7 82.6 1.6
1 25 125 17.5 54 33.4 62 50.8 7 88.9 1.6
1 1/4 32 135 20.7 64 42.2 67 63.5 7 98.4 1.6
1 1/2 40 155 22.3 70 48.3 70 73 7 114.3 1.6
2 50 165 25.4 84 60.3 73 92.1 7 127 1.6
2 1/2 65 190 28.6 100 73 79 104.8 7 149.2 1.6
3 80 210 31.8 117 88.9 83 127 7 168.3 1.6
3 1/2 90 230 35 133 101.6 86 139.7 7 184.2 1.6
4 100 275 38.1 152 114.3 102 157.2 7 215.9 1.6
5 125 330 44.5 189 141.3 114 185.7 7 266.7 1.6
6 150 355 47.7 222 168.3 117 215.9 7 292.1 1.6
8 200 420 55.6 273 219.1 133 269.9 7 349.2 1.6
10 250 510 63.5 343 273 152 323.8 7 431.8 1.6
12 300 560 66.7 400 323.8 156 381 7 489 1.6
14 350 605 69.9 432 355.6 165 412.8 7 527 1.6
16 400 685 76.2 495 406.4 178 469.9 7 603.2 1.6
18 450 745 82.6 546 457 184 533.4 7 654 1.6
20 500 815 88.9 610 508 190 584.2 7 723.9 1.6
24 600 940 101.6 718 610 203 692.2 7 838.2 1.6
WELD NECK FLANGE DIMENSIONS CLASS 900
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 120 22.3 38 21.3 60 Refer Note 34.9 7 82.6 1.6
3/4 20 130 25.4 44 26.7 70 42.9 7 88.9 1.6
1 25 150 28.6 52 33.4 73 50.8 7 101.6 1.6
1 1/4 32 160 28.6 64 42.2 73 63.5 7 111.1 1.6
1 1/2 40 180 31.8 70 48.3 83 73 7 123.8 1.6
2 50 215 38.1 105 60.3 102 92.1 7 165.1 1.6
2 1/2 65 245 41.3 124 73 105 104.8 7 190.5 1.6
3 80 240 38.1 127 88.9 102 127 7 190.5 1.6
4 100 290 44.5 159 114.3 114 157.2 7 235 1.6
5 125 350 50.8 190 141.3 127 185.7 7 279.4 1.6
6 150 380 55.6 235 168.3 140 215.9 7 317.5 1.6
8 200 470 63.5 298 219.1 162 269.9 7 393.7 1.6
10 250 545 69.9 368 273 184 323.8 7 469.9 1.6
12 300 610 79.4 419 323.8 200 381 7 533.4 1.6
14 350 640 85.8 451 355.6 213 412.8 7 558.8 1.6
16 400 705 88.9 508 406.4 216 469.9 7 616 1.6
18 450 785 101.6 565 457 229 533.4 7 685.8 1.6
20 500 855 108 622 508 248 584.2 7 749.3 1.6
24 600 1040 139.7 749 610 292 692.2 7 901.7 1.6
CLASS 1500 WELD NECK FLANGE DIMENSIONS
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 120 22.3 38 21.3 60 Refer Note 34.9 7 82.6 1.6
3/4 20 130 25.4 44 26.7 70 42.9 7 88.9 1.6
1 25 150 28.6 52 33.4 73 50.8 7 101.6 1.6
1 1/4 32 160 28.6 64 42.2 73 63.5 7 111.1 1.6
1 1/2 40 180 31.8 70 48.3 83 73 7 123.8 1.6
2 50 215 38.1 105 60.3 102 92.1 7 165.1 1.6
2 1/2 65 245 41.3 124 73 105 104.8 7 190.5 1.6
3 80 265 47.7 133 88.9 117 127 7 203.2 1.6
4 100 310 54 162 114.3 124 157.2 7 241.3 1.6
5 125 375 73.1 197 141.3 156 185.7 7 292.1 1.6
6 150 395 82.6 229 168.3 171 215.9 7 317.5 1.6
8 200 485 92.1 292 219.1 213 269.9 7 393.7 1.6
10 250 585 108 368 273 254 323.8 7 482.6 1.6
12 300 675 123.9 451 323.8 283 381 7 571.5 1.6
14 350 750 133.4 495 355.6 298 412.8 7 635 1.6
16 400 825 146.1 552 406.4 311 469.9 7 704.8 1.6
18 450 915 162 597 457 327 533.4 7 774.7 1.6
20 500 985 177.8 641 508 356 584.2 7 831.8 1.6
24 600 1170 203.2 762 610 406 692.2 7 990.6 1.6
Note: Welding Neck bore is derived from the pipe schedule
CLASS 2500 WELD NECK FLANGE DIMENSIONS
Size in Inch Size in mm Outer Diameter Flange Thickness Hub OD Weld Neck OD Welding Neck Length Bore RF Diameter RF Height PCD Weld Face
A B C D E F G H I J
1/2 15 135 30.2 43 21.3 73 Refer Note 34.9 7 88.9 1.6
3/4 20 140 31.8 51 26.7 79 42.9 7 95.2 1.6
1 25 160 35 57 33.4 89 50.8 7 108 1.6
1 1/4 32 185 38.1 73 42.2 95 63.5 7 130.2 1.6
1 1/2 40 205 44.5 79 48.3 111 73 7 146 1.6
2 50 235 50.9 95 60.3 127 92.1 7 171.4 1.6
2 1/2 65 265 57.2 114 73 143 104.8 7 196.8 1.6
3 80 305 66.7 133 88.9 168 127 7 228.6 1.6
4 100 355 76.2 165 114.3 190 157.2 7 273 1.6
5 125 420 92.1 203 141.3 229 185.7 7 323.8 1.6
6 150 485 108 235 168.3 273 215.9 7 368.3 1.6
8 200 550 127 305 219.1 318 269.9 7 438.2 1.6
10 250 675 165.1 375 273 419 323.8 7 539.8 1.6
12 300 760 184.2 441 323.8 464 381 7 619.1 1.6
Note: Welding Neck bore is derived from the pipe schedule
JIS Weld Neck Flange Dimensions
JIS 16K Weld Neck Flange Dimensions, JIS 20K Weld Neck Flange Dimensions
JIS Weld Neck Flange Dimensions
Nominal Outside Inside Outside Sectional Dimensions of Flange Bolt Hole Nominal Approx.
Dia. of Dia. of Dia. of Dia. of t T Dia. of Hub r Dia. of Dia. of Bolt. Number Hole Bolt Weight
Flange Steel Flange Flange a b Face Raised Face Circle of Bolt Dia. Size (kg)
Pipe do D f g Dia Holes h BL SOH
10 17.3 17.8 90 12 16 26 28 4 1 46 65 4 15 M12 0.53 0.52
15 21.7 22.2 95 12 16 30 32 4 1 51 70 4 15 M12 0.6 0.58
20 27.2 27.7 100 14 20 38 42 4 1 56 75 4 15 M12 0.79 0.75
25 34 34.5 125 14 20 46 50 4 1 67 90 4 19 M16 1.22 1.16
32 42.7 43.2 135 16 22 56 60 5 2 76 100 4 19 M16 1.66 1.53
40 48.6 49.1 140 16 24 62 66 5 2 81 105 4 19 M16 1.79 1.64
50 60.5 61.1 155 16 24 76 80 5 2 96 120 8 19 M16 2.09 1.83
65 76.3 77.1 175 18 26 94 98 5 2 116 140 8 19 M16 3.08 2.58
80 89.1 90 200 20 28 108 112 6 2 132 160 8 23 M20 4.41 3.61
-90 101.6 102.6 210 20 30 120 124 6 2 145 170 8 23 M20 4.92 3.89
100 114.3 115.4 225 22 34 134 138 6 2 160 185 8 23 M20 6.29 4.87
125 139.8 141.2 270 22 34 164 170 6 2 195 225 8 25 M22 9.21 7.09
150 165.2 166.6 305 24 38 196 202 6 2 230 260 12 25 M22 12.7 9.57
200 216.3 218 350 26 40 244 252 6 2 275 305 12 25 M22 18.4 12
250 267.4 269.5 430 28 44 304 312 6 2 345 380 12 27 M24 30.4 20.1
300 318.5 321 480 30 48 354 364 8 3 395 430 16 27 M24 40.5 24.3
350 355.6 358.1 540 34 52 398 408 8 3 440 480 16 33 M30×3 57.5 34.4
400 406.4 409 605 38 60 446 456 10 3 495 540 16 33 M30×3 81.7 47.4
450 457.2 460 675 40 64 504 514 10 3 560 605 20 33 M30×3 107 61.8
500 508 511 730 42 68 558 568 10 3 615 660 20 33 M30×3 132 73.7
-550 558.8 562 795 44 70 612 622 10 3 670 720 20 39 M36×3 163 87.9
600 609.6 613 845 46 74 666 676 10 3 720 770 24 39 M36×3 192 98.4
650 660.4 664 895 48 77 704 726 10 5 770 820 24 39 M36×3 – –
700 711.2 715 960 50 80 754 776 10 5 820 875 24 42 M39×3 – –
750 762 766 1020 52 83 806 832 10 5 880 935 24 42 M39×3 – –
800 812.8 817 1085 54 86 865 885 10 5 930 990 24 48 M45×3 – –
850 863.6 868 1135 56 89 916 936 10 5 980 1040 24 48 M45×3 – –
900 914.4 919 1185 58 93 968 986 10 5 1030 1090 28 48 M45×3 – –
1000 1016 1021 1320 62 99 1070 1098 12 5 1140 1210 28 56 M52×3 – –
1100 1117.6 1123 1420 66 105 1180 1200 12 15 1240 1310 32 56 M52×3 – –
1200 1219.2 1225 1530 70 112 1282 1302 12 5 1350 1420 32 56 M52×3 – –
1300 1320.8 1326 1645 74 – – – – 5 1450 1530 32 62 M56×3 – –
1350 1371.6 1377 1700 76 – – – – 5 1510 1590 32 62 M56×3 – –
1400 1422.4 1428 1755 78 – – – – 5 1560 1640 36 62 M56×3 – –
1500 1524 1529 1865 80 – – – – 5 1670 1750 36 62 M56×3 – –
ANSI B16.5 Weld Neck Flange Schedule Chart, Weld Neck Flange Thickness Chart
Weld Neck Flange Schedule Chart
WELDING NECK FLANGES BORES (in inchines)
Nom Pipe Size Outside Diam Sched 10 Sched 20 Sched 30 Std. Wall Sched 40 Sched 60 Extra Strong Sched 80 Sched 100 Sched 120 Sched 140 Sched 160 Double Extra Strong
1/2” 0.840 0.674 – – 0.622 0.622 – 0.546 0.546 – – – 0.464 0.252
3/4” 1.050 0.884 – – 0.824 0.824 – 0.742 0.742 – – – 0.612 0.434
1” 1.315 1.097 – – 1.049 1.049 – 0.957 0.957 – – – 0.815 0.599
1.1/4” 1.660 1.442 – – 1.380 1.380 – 1.278 1.278 – – – 1.160 0.896
1.1/2” 1.900 1.682 – – 1.610 1.610 – 1.500 1.500 – – – 1.338 1.100
2” 2.375 2.157 – – 2.067 2.067 – 1.939 1.939 – – – 1.687 1.503
2.1/2” 2.875 2.635 – – 2.469 2.469 – 2.323 2.323 – – – 2.125 1.771
3” 3.500 3.260 – – 3.068 3.068 – 2.900 2.900 – – – 2.624 2.300
3-1/2” 4.000 3.760 – – 3.548 3.548 – 3.364 3.364 – – – – 2.728
4” 4.500 4.260 – – 4.026 4.026 – 3.826 3.826 – 3.624 – 3.438 3.152
5” 5.563 5.295 – – 5.047 5.047 – 4.813 4.813 – 4.563 – 4.313 4.063
6” 6.625 6.357 – – 6.065 6.065 – 5.761 5.761 – 5.501 – 5.187 4.897
8” 8.625 8.329 8.125 8.071 7.981 7.981 7.813 7.625 7.625 7.437 7.187 7.001 6.813 6.875
10” 10.750 10.420 10.250 10.136 10.020 10.020 9.750 9.750 9.562 9.312 9.062 8.750 8.500 8.750
12” 12.750 12.390 12.250 12.090 12.000 11.938 11.626 11.750 11.374 11.062 10.750 10.500 10.126 10.750
14” 14.000 13.500 13.376 13.250 13.250 13.124 12.812 13.000 12.500 12.124 11.814 11.500 11.188 –
16” 16.000 15.500 15.376 15.250 15.250 15.000 14.688 15.000 14.312 13.938 13.564 13.124 12.812 –
18” 18.000 17.500 17.376 17.124 17.250 16.876 16.500 17.000 16.124 15.688 15.250 14.876 14.438 –
20” 20.000 19.500 19.250 19.000 19.250 18.812 18.376 19.000 17.938 17.438 17.000 16.500 16.062 –
24” 24.000 23.500 23.250 22.876 23.250 22.624 22.062 23.000 21.562 20.938 20.376 19.876 19.312 –
30” 30.000 29.376 29.000 28.750 29.250 – – 29.000 – – – – – –
36” 36.000 35.376 35.000 34.750 35.250 34.500 – 35.000 – – – – – –
42” 42.000 – – – 41.250 – – 41.000 – – – – – –
Weld Neck Flange Weight, Weld Neck Flange Weight in KG
ANSI B16.5 WELD NECK FLANGES WEIGHT (KGS)
Nom Pipe Size 150# 300# 600# 900# 1500# 2500#
WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K WN S/O B/K
1/2” 0.7 0.4 0.5 0.8 0.7 0.8 0.9 0.8 0.8 2.1 1.8 1.9 2.1 1.8 1.9 3.2 3 3
3/4” 0.8 0.7 0.8 1.4 1.2 1.2 1.6 1.4 1.4 2.7 2.4 2.7 2.7 2.4 2.7 3.6 4 4.5
1” 1.1 0.8 0.9 1.7 1.4 1.5 1.9 1.7 1.7 3.9 3.6 3.7 3.9 3.6 3.7 5.4 5 5
1.1/4” 1.5 1.2 1.3 2.2 1.8 2 2.6 2.1 2.4 4.5 4.1 4.3 4.5 4.1 4.3 7.8 8 8
1.1/2” 1.8 1.4 1.6 3.2 2.7 2.9 3.6 3.1 3.4 6.2 5.4 5.9 6.2 5.4 5.9 11.5 11 11
2” 2.7 2.2 2.6 3.6 3.2 3.5 4.7 3.9 4.4 11.3 10.5 11.3 11.3 10.5 11.3 19 17 17
2.1/2” 4.4 3.5 4.1 5.4 4.5 5.3 4.8 5.4 6.8 16.3 15.8 16 16.3 15.8 16 24 25 25
3” 5.2 3.8 5.1 7.3 5.9 7.2 8.7 7.3 8.9 15 12.3 16.8 21 21.5 19.5 42.6 38 39
3-1/2” 6.4 5 6.5 8.9 7.5 9.2 11.6 9 12.7 – – – – – – – – –
4” 7.5 5.6 7.5 11.8 10 12.2 18.4 16.5 18.6 24 23.2 24.5 31.8 31 33 64 58 60
5” 9.2 6.5 9.2 16 12.5 16 31 28.5 30.8 38.5 37.5 39.5 59 58.8 60 111 95 101
6” 11.0 8.1 11.8 20.2 16.5 22 37 36.2 38 50 48.3 51.5 72 74 75 171 146 156
8” 18.4 13 20.4 31.2 25.5 36 54.5 51.5 62.2 85 75 89 124 112 125 261 220 242
10” 25.5 18.4 31 44.3 35 55 98.5 76.2 102 123 110 131 207 184 215 485 420 465
12” 37 28.5 47 63.5 52 82.5 105 89.5 132 168 146 187 306 264 316 698 590 665
14” 51 37.5 60 86 73 108 150 102 158 198 172 224 416 – – – – –
16” 61.5 44.5 61 112 88 139 177 150 225 225 192 259 567 – – – – –
18” 71.5 54 93 141 115 178 228 180 285 318 272 383 736 – – – – –
20” 85 72 127 173 139 228 285 231 365 376 330 482 929 – – – – –
24” 119 95 190 248 212 350 372 330 532 680 632 905 1504 – – – – –
ANSI B16.5 Weld Neck Flange Tolerances
Weld Neck Flange Tolerances
Dimension Flange Tolerance
A Outside Diameter
  • When O.D. is 24″ or less: ±1/16″ (1.6mm)
  • When O.D. is over 24″: ±1/8″ (3.2mm)
D Inside Diameter
  • 10″ and smaller: ±1/32″ (0.8mm)
  • 12″ thru 18″: +1/8″ (3.2mm)
  • 20″ and larger: -1/16″ (1.6mm)
B Diameter of contact face
  • 1/16″ raised face: ±1/32″ (0.8mm)
  • 1/4″ Raised Face, Tongue & Groove (male & female): ±1/64″ (0.4mm)
J Diameter of hub at base
  • When hub base is 24″ or smaller: ±1/16″ (1.6mm)
  • When hub base is over 24″: ±1/8″ (3.2mm)
H Diameter of hub at point of welding
  • 5″ and smaller: +3/32″ (2.4mm), -1/32″ (0.8mm)
  • 6″ and larger: +5/32″ (4.0mm), -1/32 (0.8mm)
P Drilling
  • Bolt circle: ±1/16″ (1.6mm)
  • Bolt hole spacing: ±1/32″ (0.8mm)
Eccentricity of bolt circle with respect to facing
  • 2 1/2″ and smaller ±1/32″ (0.8mm) max.
  • 3″ and larger ±1/16″ (1.6mm) max.
C Thickness
  • 18″ and smaller: ±1/8″ (3.2mm), -0″
  • 20″ and larger: ±3/16″ (4.8mm), -0″
K Length of hub
  • 10″ and smaller: ±1/16″ (1.6mm)
  • 12″ and larger: ±1/8″ (3.2mm)
Weld Neck Flange Uses
Our offered ANSI B16.5 Weld neck flanges are used in various industrial applications where the conditions are critical and severe. Some of these conditions include high temperature, high pressure, wide fluctuations in temperature and pressure, fluids that are hazardous and volatile, and temperatures in the sub-zero range.
ASME B16.5 Weld Neck Flange Price List
Long Weld Neck Flange Price: $15.45 / each ANSI B16.5 WNRF Flange Price: $20.14 / each Reducing Weld Neck Flange Price: $18.35 / each
ASME/ANSI B16.5 Weld Neck Flange Supplying to Following Regions & Countries:
AFRICA Nigeria Algeria Angola Tanzania Libya Egypt Sudan Equatorial Guinea The Republic Of Congo Gabon NORTH AMERICA Usa Canada Mexico Costa Rica Trinidad And Tobago Jamaica Denmark MIDDLE EAST ASIA Saudi Arabia Iran Iraq Uae Qatar Bahrain Oman Kuwait Turkey Jordan SOUTH AMERICA Argentina Bolivia Brazil Chile Venezuela Colombia Ecuador Guyana Paraguay Uruguay EUROPE Norway Germany France Italy Uk Spain Netherland Belgium Greece Czech Republic Portugal Hungary SOUTH AFRICA ASIA India Singapore Malaysia Indonesia Thailand Vietnam South Korea Japan Sri Lanka Maldives Bangladesh Mayanmar Taiwan Cambodia

Get in Touch

You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.

Customer Care Number

63539 49804

Email us

arcellorcontrols@gmail.com

Awesome Image

Logo

© 2023Arcellor.
made with by FinPlus