Welcome to Arcellor!
Tube fittings have their own installation instructions that need to be followed precisely in order to get the desired output. The installation instructions will include the essay specification along with recommendation and for which application these tube fittings will work. without following these installation instructions it is highly recommended that you should not proceed with the tube fitting installation. Have a glance!
For high pressure application
Due to variation in the tubing diameter Arcellor Controls (INDIA) recommends the following instructions for safety and excellent performance of high pressure applications.
Arcellor Controls (INDIA) Tube fittings may be assembled and disassembled repeatedly. The following instructions should be carried out to reassemble the fittings.
SAE / MS STRAIGHT THREAD AND ISO PARALLEL THREAD POSITIONABLE
The ‘O’- ring requires a smooth, flat seating surface, this surface must be perpendicular to the axis of the threads.
Arcellor Controls (INDIA) SAE Straight thread ‘O’-ring fittings are designed and manufactured to meet SAE standard as follows
Arcellor Controls (INDIA) Tube fittings with SAE Ends Straight thread
Connectors, Positionable SAE Elbows and Tees and SAE reducers.
|Nominal Tube OD||Port Size||Thread Size||‘O’ Ring Size No.|
PORT CONNECTOR INSTALLATION PROCEDURE
PLUG INSTALLATION PROCEDURE
For 6mm, 1/4 and above size Tube Fittings, tighten the plug with wrench 1/4 turn from finger tight position.
For 1/8, 3/16, 3mm and 4mm tube fittings, tighten the plug with wrench 1/8 turn only.
Make subsequent connection by tightening slightly with wrench after snugging the nut by hand.